Auto Screw on Capper Machine




Auto Screw on Capper Machine

Characteristics of Machine:

The machine achieves the complete capping process by the sequence from cap sorting → cap distribution → capping.

Initially the cap inside the hopper, from the disc gear ring via small gear reducer motor rotates the gear ring disk. The cap is by the clearance between gear top and bottom, to orientate the cap to the certain direction, and through cap guide slide to the pick up distributor loading disk, then via star wheel to separate the same distance. At this time, cap pick up distributor is rotating by the spindle, let the cap step by step into the center of capping head, then the capping head goes down to place the cap into the cap hat.

The spindle drives the capper, there are some slide seat rod ring arrange on the capping. Capping head that is under the slide seat rod, for the pick up distributor with same distance cap via cap hat to put the cap inside. Small gear on the top of slide seat rod contacts firmly with the fixed ring inner gear disk via capper turning let the slide seat rod rotation. There is one axial cam seat via the cam channel stroke, let the slide seat rod to do the round up and down motion. When round motion is in upward, slide seat will reject the missing cap to the bottle mouth, the cap hat receives one more new cap. When round motion is in downward, the capping head contacts with the bottle mouth. At this time, the slide seat rod turns for the cap into the bottle mouth to finish the capping process.

自动旋盖机

该机由理盖→瓶盖送给→封盖顺序, 达到全封盖的工艺。最初在料斗内, 从圆盘齿轮环通过小齿轮减速电机旋转齿轮环盘。该帽是由间隙之间的齿轮顶部和底部, 以定位帽到一定的方向, 并通过帽导轨滑动到拾取分配器加载磁盘, 然后通过星轮分开相同的距离。此时, 盖子通过主轴旋转分配器, 让瓶盖一步一步进入封盖头的中心, 然后盖头向下将瓶盖放入盖帽中。

主轴驱动封盖机, 在旋盖机上有一些滑座杆环。旋盖头在滑动座杆下, 从分配器中挑选相同距离的盖子,通过盖帽把盖子套进去。在滑动座杆顶部的小齿轮与固定环内齿盘牢固接触, 通过封口机转动让滑动座杆转动。通过凸轮通道行程有一个轴向凸轮座, 让滑动座杆做圆形上下运动。当圆角运动向上时, 滑动座会将丢失的瓶盖拒于瓶口,盖帽又收到一个新的盖子。当圆运动向下时, 盖头与瓶子口接触。此时, 滑动座杆转向瓶盖进入瓶口, 完成封盖过程。







logo_pic